Top 12 Compressed Air Safety Guidelines - ABAC Compressor
1. Never apply compressed air to the skin or direct it at a person. Even air at a pressure of 15 psi (1 bar) can cause serious injury. Never use a compressed air hose to clean dirt or dust from your clothing or body.
2. When using compressed air for cleaning purposes, ensure pressure does not exceed 30 psi. Always use goggles or a face shield over approved safety glasses for this application.
3. Wear ear protection. Exposure to excessive noise can damage hearing. Noise reducing mufflers can be fitted to machines to lessen the noise health hazard.
4. Never crimp, couple, or uncouple pressurized hose. Shut off valves and bleed down pressure before making any hose adjustments.
5. Use heavy duty clamps made especially for compressed air systems. Use only the correct type and size of hose end fittings and connections.
6. Never use frayed, damaged or deteriorated hoses. Always store hoses properly and away from heat sources or direct sunlight. A hose failure can cause serious injury. Hose Reels can decrease your chances of injury, as well as help hoses last longer.
7. When blowing compressed air through a hose or air line, ensure that the open end is held securely. A free end can whip and can cause injury. Open the supply air cock carefully and ensure that any ejected particles will be restrained. A blocked hose can become a dangerous “compressed air gun.”
8. Make sure all hoses exceeding 1/2 inch ID have a safety device at the source of supply or branch line to reduce the pressure in case of hose failure.
9. Do not use air directly from a compressor for breathing purposes, for example charging air cylinders, unless the system has been specifically designed for such purpose and suitable breathing air filters and regulators are in place.
10. Isolating valves should be of the self venting type and designed to be locking in the "off" position so that air pressure cannot be applied inadvertently while the machine is being worked on.
11. Never alter or install an A.S.M.E. safety relief valve that has a higher PSIG rating than the pressure vessel rating to which it is attached.
12. Only pressure vessels built to a national or international standard should be used for air receivers.
This is nice blog.Alpha Enterprises Established in the year 1993. Perfect accuracy is main strength of our company. Another specialty at the time of development according to customer requirement we give the design of the product and also inform all the related important fact about that product even without additional cost and we never insist for popularity. From small sample size till 100,000 and more than that qty can easily be produced in our company. Crimping Hose with end fitting.
ReplyDelete